How to Program a Chevy Garage Door Opener

Congratulations on your purchase of a new Chevy from DeYarman Automotive! Whether you bought a zippy Camaro, stalwart Blazer, or Silverado 1500 pickup, you can take advantage of the connectivity found in your vehicle thanks to Homelink. This is Chevy’s proprietary technology that opens and closes your garage in Knoxville with ease. 

Keep reading to learn how to program a Chevy garage door opener. We want you to get the most out of your driving experience around Pella.

How to Program a Chevy Garage Door Opener: Initial Setup

1. Confirm that there is a recent or new battery in your remote control transmitter. 
2. Face your vehicle towards the garage.
3. Turn on the ignition.
4. Find your vehicle’s Homelink buttons on your visor, rearview mirror, or overhead console.
5. Position the remote control transmitter from 1 to 3 inches from the Homelink control buttons. 
6. Simultaneously, press your preferred Homelink control button and the remote control button.
7. Press the remote control button until the Homelink indicator light comes on and either becomes a solid light or quickly.
8. This change means that the frequency signal has been noted in the system. 
9. Press the Homelink controller button two times to activate.
10. See what the Homelink indicator light is doing. If it’s solid, this indicates that the programming is finished. If the Homelink indicator light flashes quickly instead, follow the troubleshooting steps we’ve outlined below.

How to Program a Chevy Garage Door Opener: Troubleshooting

If you tried to program your Chevy garage door opener and got a quickly flashing light, you have a rolling code system stored in the memory of your garage door opener and remote device. Follow these troubleshooting steps to figure out how to program a Chevy garage door opener after the initial attempt in Indianola.

1. Get out of your vehicle.
2. Find the garage door opener motor inside your garage. 
3. Search for the “Smart” or “Learn” button, usually beside the antenna wire hanging on the back of the motor. 
4. Push the “Smart” or “Learn” button once.
5. Finish the next two steps within 30 seconds.
6. Return to the vehicle.
7. Press your programmed Homelink control button three times. This will finish the activation process. 
8. For the other two Homelink buttons still remaining, repeat steps 4 through 7. This should activate your garage door. 
9. The original remote control transmitter and the Homelink wireless control system, once programmed, can be used in conjunction with your Chevy garage door opener.

Chevy Service From the Team at DeYarman Automotive

After following the steps on how to program your Chevy garage door opener, if it still doesn’t work as you expect, look at your owner’s manual. You can also contact us or call (641) 323-4173 at our service center near Southeast Des Moines for more assistance. We’re happy to help in any way we can! Read our service tips for more great ways to take care of your Chevy vehicle.